Design Engineers for automotive engines and transmissions need the high performance boost from the REM Isotropic Finishing Process. Metal-to-metal contact components such as bearings, gears, valve trains, connecting rods and crank shafts all have achieved performance increases when finished with the REM Process.
Processed components show as much as a 30% gain in life cycle tests on metal to metal contact surfaces. Isotropic Finish produced a reduction of 10x in frictional forces when compared to an engineered ground finish
A 390 HP Car equipped with a T101 transmission showed a 5 HP gain over untreated gears on a chassis dyno. Isotropic Finish produced a 20x reduction in wear when compared to an engineered ground finish
Less Friction and Less Heat
Processed components show as much as a 10x reduction in frictional forces and up to 20C degree reduction in operating temperature. Isotropic Finish produced a 20C degree reduction in sump oil temperature when compared to an engineered ground finish
To find find out more about our REM Finishing services, give us a call at +1 724.536.6661